The following source code is a major update to chastehex for 32-bit Assembly source code for Linux. The behavior of the program hasn’t changed. It is still the great command line hex editor. However, the executable is a lot smaller than it previously was. I found some optimizations to reduce function calls and also removed some of the text while still having the messages say the same basic idea. This may not mean much to the average person but this is the best hand written assembly I have ever achieved and I made some extensions to chastelib that will be helpful for future programs.
main.asm
;Linux 32-bit Assembly Source for chastehex
;a special tool originally written in C
format ELF executable
entry main
start:
include 'chastelib32.asm'
main:
;radix will be 16 because this whole program is about hexadecimal
mov dword [radix],16 ; can choose radix for integer input/output!
pop eax
mov [argc],eax ;save the argument count for later
;first arg is the name of the program. we skip past it
pop eax
dec dword [argc]
;before we try to get the first argument as a filename, we must check if it exists
cmp dword [argc],0
jnz arg_open_file
help:
mov eax,help_message
call putstring
jmp main_end
arg_open_file:
pop eax
dec dword [argc]
mov [filename],eax ; save the name of the file we will open to read
call putstr_and_line
;Linux system call to open a file
mov ecx,2 ;open file in read and write mode
mov ebx,eax ;filename should be in eax before this function was called
mov eax,5 ;invoke SYS_OPEN (kernel opcode 5)
int 80h ;call the kernel
cmp eax,0
jns file_open_no_errors ;if eax is not negative/signed there was no error
;Otherwise, if it was signed, then this code will display an error message.
neg eax
call putint_and_space
mov eax,open_error_message
call putstr_and_line
jmp main_end ;end the program because we failed at opening the file
file_open_no_errors:
mov [filedesc],eax ; save the file descriptor number for later use
mov dword [file_offset],0 ;assume the offset is 0,beginning of file
;check next arg
cmp dword [argc],0 ;if there are no more args after filename, just hexdump it
jnz next_arg_address ;but if there are more, jump to the next argument to process it as address
hexdump:
mov edx,0x10 ;number of bytes to read
mov ecx,byte_array ;address to store the bytes
mov ebx,[filedesc] ;move the opened file descriptor into EBX
mov eax,3 ;invoke SYS_READ (kernel opcode 3)
int 80h ;call the kernel
mov [bytes_read],eax
cmp eax,0
jnz file_success ;if more than zero bytes read, proceed to display
;display EOF to indicate we have reached the end of file
mov eax,end_of_file_string
call putstr_and_line
jmp main_end
; this point is reached if file was read from successfully
file_success:
call print_bytes_row
cmp dword [bytes_read],1
jl main_end ;if less than one bytes read, there is an error
jmp hexdump
;address argument section
next_arg_address:
;if there is at least one more arg
pop eax ;pop the argument into eax and process it as a hex number
dec dword [argc]
call strint
;use the hex number as an address to seek to in the file
mov edx,0 ;whence argument (SEEK_SET)
mov ecx,eax ;move the file cursor to this address
mov ebx,[filedesc] ;move the opened file descriptor into EBX
mov eax,19 ;invoke SYS_LSEEK (kernel opcode 19)
int 80h ;call the kernel
mov [file_offset],eax ;move the new offset
;check the number of args still remaining
cmp dword [argc],0
jnz next_arg_write ; if there are still arguments, skip this read section and enter writing mode
read_one_byte:
mov edx,1 ;number of bytes to read
mov ecx,byte_array ;address to store the bytes
mov ebx,[filedesc] ;move the opened file descriptor into EBX
mov eax,3 ;invoke SYS_READ (kernel opcode 3)
int 80h ;call the kernel
;eax will have the number of bytes read after system call
cmp eax,1
jz print_byte_read ;if exactly 1 byte was read, proceed to print info
call show_eof
jmp main_end ;go to end of program
;print the address and the byte at that address
print_byte_read:
call print_byte_info
;this section interprets the rest of the args as bytes to write
next_arg_write:
cmp dword [argc],0
jz main_end
pop eax
dec dword [argc]
call strint ;try to convert string to a hex number
;write that number as a byte value to the file
mov [byte_array],al
mov eax,4 ;invoke SYS_WRITE (kernel opcode 4 on 32 bit systems)
mov ebx,[filedesc] ;write to the file (not STDOUT)
mov ecx,byte_array ;pointer to temporary byte address
mov edx,1 ;write 1 byte
int 80h ;system call to write the message
call print_byte_info
inc dword [file_offset]
jmp next_arg_write
main_end:
;this is the end of the program
;we close the open file and then use the exit call
;Linux system call to close a file
mov ebx,[filedesc] ;file number to close
mov eax,6 ;invoke SYS_CLOSE (kernel opcode 6)
int 80h ;call the kernel
mov eax, 1 ; invoke SYS_EXIT (kernel opcode 1)
mov ebx, 0 ; return 0 status on exit - 'No Errors'
int 80h
;this function prints a row of hex bytes
;each row is 16 bytes
print_bytes_row:
mov eax,[file_offset]
mov dword [int_width],8
call putint_and_space
mov ebx,byte_array
mov ecx,[bytes_read]
add [file_offset],ecx
next_byte:
mov eax,0
mov al,[ebx]
mov dword [int_width],2
call putint_and_space
inc ebx
dec ecx
cmp ecx,0
jnz next_byte
mov ecx,[bytes_read]
pad_spaces:
cmp ecx,0x10
jz pad_spaces_end
mov eax,space_three
call putstring
inc ecx
jmp pad_spaces
pad_spaces_end:
;optionally, print chars after hex bytes
call print_bytes_row_text
call putline
ret
space_three db ' ',0
print_bytes_row_text:
mov ebx,byte_array
mov ecx,[bytes_read]
next_char:
mov eax,0
mov al,[ebx]
;if char is below '0' or above '9', it is outside the range of these and is not a digit
cmp al,0x20
jb not_printable
cmp al,0x7E
ja not_printable
printable:
;if char is in printable range,keep as is and proceed to next index
jmp next_index
not_printable:
mov al,'.' ;otherwise replace with placeholder value
next_index:
mov [ebx],al
inc ebx
dec ecx
cmp ecx,0
jnz next_char
mov [ebx],byte 0 ;make sure string is zero terminated
mov eax,byte_array
call putstring
ret
;function to display EOF with address
show_eof:
mov eax,[file_offset]
mov dword [int_width],8
call putint_and_space
mov eax,end_of_file_string
call putstr_and_line
ret
;print the address and the byte at that address
print_byte_info:
mov eax,[file_offset]
mov dword [int_width],8
call putint_and_space
mov eax,0
mov al,[byte_array]
mov dword [int_width],2
call putint_and_line
ret
end_of_file_string db 'EOF',0
help_message db 'chastehex by Chastity White Rose',0Ah,0Ah
db 'hexdump a file:',0Ah,0Ah,9,'chastehex file',0Ah,0Ah
db 'read a byte:',0Ah,0Ah,9,'chastehex file address',0Ah,0Ah
db 'write a byte:',0Ah,0Ah,9,'chastehex file address value',0Ah,0Ah
db 'The file must exist',0Ah,0
;variables for managing arguments and files
argc dd 0
filename dd 0 ; name of the file to be opened
filedesc dd 0 ; file descriptor
bytes_read dd 0
file_offset dd 0
open_error_message db 'error while opening file',0
;where we will store data from the file
byte_array db 17 dup '?'
chastelib32.asm
; chastelib assembly header file for 32 bit Linux
; This file is where I keep the source of my most important Assembly functions
; These are my string and integer output and conversion routines.
; To simplify documentation. The Accumulator/Arithmetic register
; (ax,ebx,rax) depending on bit size shall be referred to as register A
; for the description of these core functions because the A register
; is treated special both by the Intel company and my code;
; putstring; Prints a zero terminated string from the address pointer to by A register.
; intstr; Converts the number in A into a zero terminated string and points A to that address
; putint; Prints the integer in A by calling intstr and then putstring.
; strint; Converts the zero terminated string into an integer and sets A to that value
; Now, the source of the functions begins, with comments included for parts that I felt needed explanation.
stdout dd 1 ; variable for standard output so that it can theoretically be redirected
putstring:
push eax
push ebx
push ecx
push edx
mov ebx,eax ; copy eax to ebx. ebx will be used as index to the string
putstring_strlen_start: ; this loop finds the length of the string as part of the putstring function
cmp [ebx],byte 0 ; compare byte at address ebx with 0
jz putstring_strlen_end ; if comparison was zero, jump to loop end because we have found the length
inc ebx
jmp putstring_strlen_start
putstring_strlen_end:
sub ebx,eax ;subtract start pointer from current pointer to get length of string
;Write string using Linux Write system call.
;Reference for 32 bit x86 syscalls is below.
;https://www.chromium.org/chromium-os/developer-library/reference/linux-constants/syscalls/#x86-32-bit
mov edx,ebx ;number of bytes to write
mov ecx,eax ;pointer/address of string to write
mov ebx,[stdout] ;write to the STDOUT file
mov eax, 4 ;invoke SYS_WRITE (kernel opcode 4 on 32 bit systems)
int 80h ;system call to write the message
pop edx
pop ecx
pop ebx
pop eax
ret ; this is the end of the putstring function return to calling location
; This is the location in memory where digits are written to by the intstr function
; The string of bytes and settings such as the radix and width are global variables defined below.
int_string db 32 dup '?' ;enough bytes to hold maximum size 32-bit binary integer
int_string_end db 0 ;zero byte terminator for the integer string
radix dd 2 ;radix or base for integer output. 2=binary, 8=octal, 10=decimal, 16=hexadecimal
int_width dd 8
;this function creates a string of the integer in eax
;it uses the above radix variable to determine base from 2 to 36
;it then loads eax with the address of the string
;this means that it can be used with the putstring function
intstr:
mov ebx,int_string_end-1 ;find address of lowest digit(just before the newline 0Ah)
mov ecx,1
digits_start:
mov edx,0;
div dword [radix]
cmp edx,10
jb decimal_digit
jae hexadecimal_digit
decimal_digit: ;we go here if it is only a digit 0 to 9
add edx,'0'
jmp save_digit
hexadecimal_digit:
sub edx,10
add edx,'A'
save_digit:
mov [ebx],dl
cmp eax,0
jz intstr_end
dec ebx
inc ecx
jmp digits_start
intstr_end:
prefix_zeros:
cmp ecx,[int_width]
jnb end_zeros
dec ebx
mov [ebx],byte '0'
inc ecx
jmp prefix_zeros
end_zeros:
mov eax,ebx ; now that the digits have been written to the string, display it!
ret
; function to print string form of whatever integer is in eax
; The radix determines which number base the string form takes.
; Anything from 2 to 36 is a valid radix
; in practice though, only bases 2,8,10,and 16 will make sense to other programmers
; this function does not process anything by itself but calls the combination of my other
; functions in the order I intended them to be used.
putint:
push eax
push ebx
push ecx
push edx
call intstr
call putstring
pop edx
pop ecx
pop ebx
pop eax
ret
;this function converts a string pointed to by eax into an integer returned in eax instead
;it is a little complicated because it has to account for whether the character in
;a string is a decimal digit 0 to 9, or an alphabet character for bases higher than ten
;it also checks for both uppercase and lowercase letters for bases 11 to 36
;finally, it checks if that letter makes sense for the base.
;For example, G to Z cannot be used in hexadecimal, only A to F can
;The purpose of writing this function was to be able to accept user input as integers
strint:
mov ebx,eax ;copy string address from eax to ebx because eax will be replaced soon!
mov eax,0
read_strint:
mov ecx,0 ; zero ecx so only lower 8 bits are used
mov cl,[ebx]
inc ebx
cmp cl,0 ; compare byte at address edx with 0
jz strint_end ; if comparison was zero, this is the end of string
;if char is below '0' or above '9', it is outside the range of these and is not a digit
cmp cl,'0'
jb not_digit
cmp cl,'9'
ja not_digit
;but if it is a digit, then correct and process the character
is_digit:
sub cl,'0'
jmp process_char
not_digit:
;it isn't a digit, but it could an alphabet character which is a digit in a higher base
;if char is below 'A' or above 'Z', it is outside the range of these and is not capital letter
cmp cl,'A'
jb not_upper
cmp cl,'Z'
ja not_upper
is_upper:
sub cl,'A'
add cl,10
jmp process_char
not_upper:
;if char is below 'a' or above 'z', it is outside the range of these and is not lowercase letter
cmp cl,'a'
jb not_lower
cmp cl,'z'
ja not_lower
is_lower:
sub cl,'a'
add cl,10
jmp process_char
not_lower:
;if we have reached this point, result invalid and end function
jmp strint_end
process_char:
cmp ecx,[radix] ;compare char with radix
jae strint_end ;if this value is above or equal to radix, it is too high despite being a valid digit/alpha
mov edx,0 ;zero edx because it is used in mul sometimes
mul dword [radix] ;mul eax with radix
add eax,ecx
jmp read_strint ;jump back and continue the loop if nothing has exited it
strint_end:
ret
;The utility functions below simply print a space or a newline.
;these help me save code when printing lots of strings and integers.
space db ' ',0
line db 0Dh,0Ah,0
putspace:
push eax
mov eax,space
call putstring
pop eax
ret
putline:
push eax
mov eax,line
call putstring
pop eax
ret
;a function for printing a single character that is the value of al
char: db 0,0
putchar:
push eax
mov [char],al
mov eax,char
call putstring
pop eax
ret
;a small function just for the common operation
;printing an integer followed by a space
;this saves a few bytes in the assembled code
;by reducing the number of function calls in the main program
putint_and_space:
call putint
call putspace
ret
;a small function just for the common operation
;printing an integer followed by a line feed
;this saves a few bytes in the assembled code
;by reducing the number of function calls in the main program
putint_and_line:
call putint
call putline
ret
;a small function just for the common operation
;printing a string followed by a line feed
;this saves a few bytes in the assembled code
;by reducing the number of function calls in the main program
;it also means we don't need to include a newline in every string!
putstr_and_line:
call putstring
call putline
ret
Chastity White Rose 
Leave a comment